|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SOLID TANTALUM ELECTROLYTIC CAPACITORS MUSE F95 Conformal coated Chip, For Mobile Audio Specifications Adapted to the RoHS directive (2002/95/EC). Item Per formance Characteristics Category --55 ~ +125C (Rated temperature : +85C) Temperature Range Capacitance Tolerance 20% (at 120Hz) Dissipation Factor Refer to next page (at 120Hz) ESR(100kHz) Refer to next page Leakage Current Capacitance Change by Temperature * After 1 minute's application of rated voltage, leakage current at 25C is not more than 0.01CV or 0.5 A, whichever is greater. +15% Max. (at +125C) +10% Max. (at + 85C) --10% Max. (at --55C) At 40C, 90 ~ 95% R.H., For 500 hours (No voltage applied) Capacitance Change * * * * * * Refer to next page (1) Damp Heat Dissipation Factor * * * * * * * * * * Initial specified value or less Leakage Current * * * * * * * * * * * * Initial specified value or less At --55C / +125C, 30 minutes each, For 5 cycles, Capacitance Change * * * * * * Refer to next page (1) Temperature Cycles Dissipation Factor * * * * * * * * * * Initial specified value or less Leakage Current * * * * * * * * * * ** Initial specified value or less Applications Mobile Audio Player Digital video camcorder Reflow at 260C for 10 seconds Digital still camera Mobile phone Resistance to Soldering Heat Capacitance Change * * * * * * * * * Refer to next page (1) Dissipation Factor * * * * * * * * * * * * * Initial specified value or less Leakage Current * * * * * * * * * * ** * * * Initial specified value or less After application of surge voltage in series with a 33 resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85C, capacitors meet the characteristics requirements listed below. Capacitance Change * * * * * * Refer to next page (1) Dissipation Factor * * * * * * * * * * Initial specified value or less Leakage Current * * * * * * * * * * * * Initial specified value or less After 2000 hours' application of rated voltage at 85C, or derated voltage at 125C, capacitors meet the characteristic requirements listed below. Capacitance Change * * * * * * Refer to next page (1) Dissipation Factor * * * * * * * * * * Initial specified value or less Leakage Current * * * * * * * * * * ** Initial specified value or less After applying the pressure load of 5N for 10 1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered 5N (0.51kg * f) beforehand on an aluminum substrate, For 10 1 seconds there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of the capacitor, the pressure strength is applied with 20 R230 a specified jig at the center of the substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable 45 45 abnormality on the capacitor terminals. Feature Rich sound in the bass register and clear sound,Materials are strictly selected to achieve high level sound. F95 series has no lead-frame, and no vibration factor. Low ESR, Low ESL Line up miniature size and high capacitance, necessary to mobile design. Surge Endurance Type numbering system (Example : 4V 220 F) Shear Test 1 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 16 F95 0G 227 M A AM1 Q2 Single face electrode MUSE series code Taping code (Refer to page 267 for details) Case code Capacitance tolerance Rated Capacitance Rated voltage Series Terminal Strength As for the surge and derated voltage at 125C, refer to page 266 for details. Drawing L W Dimensions case code S A T B L 3.2 0.3 3.2 0.3 3.5 0.2 3.5 0.2 W 1.6 0.3 1.7 0.3 2.7 0.2 2.8 0.2 H 1.0 0.2 1.4 0.2 1.0 0.2 1.8 0.2 A 0.8 0.3 0.8 0.3 0.8 0.2 0.8 0.3 B 1.2 0.3 1.2 0.3 1.2 0.2 1.2 0.3 C 0.8 0.3 0.8 0.3 1.1 0.2 1.1 0.3 (mm) H Resin (D) (0.2) (0.2) (0.2) (0.2) D dimension only for reference Solder electrode Solder electrode (D) A B C Single-side electrodes (Both electrodes at bottom side only) CAT.8100V 1mm SOLID TANTALUM ELECTROLYTIC CAPACITORS MUSE F95 Standard ratings V Cap. (F) Code Marking 4 0G S S S S*A*T T*B (B) (B) 6.3 0J S*A S*A*T (A) ( T) * B (B) F code 68 W7 100 A8 Rating (capacitance) code 10 1A B B S*A case T*B Case 68 100 150 220 330 470 680 686 107 157 227 337 477 687 J8 J8 150 E8 220 J8 330 N8 470 S8 680 W8 ( ) The series in parentheses are being developed. Please contact to your local Nichicon sales office when these series are being designed in your application. Standard ratings Rated Rated Volt Capacitance (F) Case code Part Number *1 Leakage Disspation ESR C/C Factor Current (A) (%@120Hz) (@100kHz) (%) 68 100 150 4V 220 220 220 330 330 68 68 6.3V 100 100 100 220 10V 68 100 *1 : C/C S S S S A T T B S A S A T B B B F950G686MSAAM1Q2 F950G107MSAAM1Q2 F950G157MSAAM1Q2 F950G227MSAAM1Q2 F950G227MAAAM1Q2 F950G227MTAAM1Q2 F950G337MTAAM1Q2 F950J686MSAAM1Q2 F950J686MAAAM1Q2 F950J107MSAAM1Q2 F950J107MAAAM1Q2 F950J107MTAAM1Q2 F950J227MBAAM1Q2 F951A686MBAAM1Q2 F951A107MBAAM1Q2 2.7 4.0 6.0 8.8 8.8 8.8 13.2 4.3 4.3 6.3 6.3 6.3 13.9 6.8 10.0 10 14 22 25 25 25 40 30 14 12 20 14 14 30 12 14 0.8 0.8 0.8 0.8 0.8 0.6 0.8 0.5 0.9 0.5 0.9 0.5 0.6 0.4 0.4 0.4 15 15 15 20 15 15 F950G337MBAAM1Q2 13.2 Item Damp Heat Tempereature cycles Resistance soldering heat Surge Endurance S * A * T * B Case (%) 10 5 5 5 10 CAT.8100V |
Price & Availability of F950G686MSAAM1Q2 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |